Stability Control
|
The system automatically turns on each time you switch the ignition on.
If a fault occurs in either the stability control or the traction control system, you may experience the following conditions:
• The stability and traction control light illuminates steadily.
• The stability control and traction control systems do not enhance your vehicle's ability to maintain traction of the wheels.
If a driving condition activates either the stability control or the traction control system you may experience the following conditions:
• The stability and traction control light flashes.
• Your vehicle slows down.
• Reduced engine power.
• A vibration in the brake pedal.
• The brake pedal is stiffer than usual.
• If the driving condition is severe and your foot is not on the brake, the brake pedal may move as the system applies higher brake force.
The stability control system has several features built into it to help you maintain control of your vehicle:
The system enhances your vehicle’s ability to prevent skids or lateral slides by applying brakes to one or more of the wheels individually and, if necessary, reducing engine power.
The system enhances your vehicle’s ability to maintain traction of the wheels by detecting and controlling wheel spin. See Using Traction Control (page 180).
181
E72903
A B
Vehicle without stability control skidding off its intended route.
Vehicle with stability control maintaining control on a slippery surface.
The system automatically turns on each time you switch the ignition on.
You cannot switch the stability control system off, but when you shift into reverse (R), the system deactivates.
You can switch the traction control system off or on. See Using Traction Control (page 180).
182
Download Manual